Using plastic paper holder tips

1. When the sealer is used for the paper plastic paper supporting packaging, attention should be paid to check whether the sealing date is accurate, and the validity of the date should be checked after the item is sealed. When the writing becomes shallow, increase the printer ink in time. The temperature of the medical sealing machine is generally 180℃, so that the polypropylene melts into the liquid film squeezed into the paper fiber; The width of the seal pattern of the paper and plastic packaging should be greater than or equal to 6mm, and the sealing must be in the same continuous shape, smooth and without wrinkles, bubbles or leaks.

 

2. When packaging, check the cleanliness and dryness of the packaged items. When high-pressure steam sterilization, the equipment cleaning and drying is not complete, and the residual oil and water are easy to wet the paper surface and cause wet packaging.

 

3. Protect the parts of sharp instruments. For example, the sharp scissors should be covered with silicone tubes or rubber tubes to prevent puncturing the paper and plastic paper support, leading to sterilization failure;

 

4, plastic bags must be properly cut and used correctly, in order to remove air, sterilization agent penetration, dry. Exhaust adverse air will be an obstacle to heat and moisture, so remove as much air as possible before sealing. Therefore, to allow room for retraction and circulation of the bag, a space of ≥2.5cm should be left between the device and the sealed edge of the bag. For large bags, after sealing one end, the air in the bag is discharged by light pressure, and then the other end is sealed. The cold air in the bag is less, the condensed water generated in the bag is less when it is hot, and the probability of wet bag is reduced.

 

5, there are concave instruments, such as bowls, cups, bending plates, etc., with paper plastic paper packaging, concave surface on the paper, conducive to steam penetration, to ensure the quality of sterilization, because the plastic surface is not permeable to steam;

 

Paper plastic paper holder is often used in the process of disinfection and sterilization, is an indispensable item in the supply room workflow.

 

During disinfection, the exchange of air disinfection factor is carried out on one side of the paper. Due to the material, it also has a good microbial barrier function, and the plastic face can be seen on the inside of the package, so that the package is clear at a glance and has a good impermeability.


Post time: Nov-14-2022